انتقل إلى معلومات المنتج
1 ل 6

CODDAR 2200mAh 60C LiPo Battery – 2S–6S, XT60 or T-Plug

CODDAR 2200mAh 60C LiPo Battery – 2S–6S, XT60 or T-Plug

CODDAR

السعر العادي $32.25 USD
السعر العادي سعر البيع $32.25 USD
أُوكَازيُون نفذ
الضرائب متضمنة. شحن يتم احتساب المبلغ عند إتمام عملية الشراء.
Connector
Battery
عرض التفاصيل الكاملة

Overview

CODDAR 2200mAh 60C LiPo batteries provide rechargeable power for compatible RC aircraft, drones, cars and boats. Choose a 2S, 3S, 4S, 5S or 6S pack, then match the XT60 or T-plug power connector to your model.

Features

  • 2200mAh lithium-polymer cells in a series-connected, single-parallel pack provide nominal voltages from 7.4 to 22.2 V.
  • 60C discharge rating across the five cell configurations.
  • A separate JST-XH balance lead provides access to individual cell voltages during compatible balance charging.
  • Shrink-wrapped rectangular construction with configuration-specific dimensions and net weights for checking battery-tray fit.
  • Standard-voltage LiPo charging with a maximum of 4.2 V per cell.

Specifications

Brand CODDAR
Chemistry Lithium polymer (LiPo)
Capacity 2200mAh
Discharge rating 60C
Charge rate 1C–5C (2.2–11 A for 2200mAh), within the charger and connector limits
Power connector options XT60 or T-plug
Full-charge limit per cell 4.2 V in LiPo mode
Storage voltage per cell Approximately 3.85 V
Recommended landing voltage per cell Approximately 3.6 V

Configuration comparison

Specification 2S 3S 4S 5S 6S
Model CD2S220060 CD3S220060 CD4S220060 CD5S220060 CD6S220060
Cell configuration 2S1P 3S1P 4S1P 5S1P 6S1P
Nominal voltage 7.4 V 11.1 V 14.8 V 18.5 V 22.2 V
Full-charge pack voltage 8.4 V 12.6 V 16.8 V 21.0 V 25.2 V
Nominal energy 16.28 Wh 24.42 Wh 32.56 Wh 40.70 Wh 48.84 Wh
Approximate net weight 126 g 185 g 240 g 293 g 355 g
Body size (L × W × H) 106 × 34 × 17 mm 107 × 34 × 25 mm 107 × 34 × 33 mm 108 × 34 × 40 mm 108 × 34 × 48 mm
Balance connector JST-XH 3-pin JST-XH 4-pin JST-XH 5-pin JST-XH 6-pin JST-XH 7-pin

Connector selection and charging

Product photographs show the XT60 version. Select the T-plug option if your model uses that connector. Check connector fit, polarity, supported cell count and available battery space before installation.

Use LiPo balance-charge mode with the correct cell count and a maximum of 4.2 V per cell. Store at approximately 3.85 V per cell. During flight, plan to land around 3.6 V per cell and avoid fully depleting the pack, which can cause over-discharge damage and prevent further use or charging.

What's Included

One CODDAR 2200mAh 60C LiPo battery in the selected cell configuration, fitted with the selected XT60 or T-plug power connector and a JST-XH balance lead.

Applications

For compatible FPV drones, multirotors, RC helicopters, fixed-wing aircraft, RC cars and RC boats. Match your model's electrical requirements, connector, battery compartment and weight allowance to the selected pack.

FAQ

Which cell count should I choose?
Match the battery's cell count and nominal voltage to the ratings of your model's electronics. Then compare the body dimensions and weight with your battery compartment.

Are XT60 and T-plug versions available?
Both connectors are offered for each cell count. The photographs show XT60, and the connector supplied follows your selected option.

Which charging mode and storage voltage should I use?
Use LiPo mode with a 4.2 V maximum per cell and the correct cell count. For storage, bring the pack to approximately 3.85 V per cell.

Visual Details

CODDAR 2S 2200mAh LiPo battery specifications, XT60 version pictured
The 2S pack has a nominal voltage of 7.4 V, an approximate net weight of 126 g and a 3-pin JST-XH balance connector. The pictured power connector is XT60.
CODDAR 2S 2200mAh LiPo battery dimensions, XT60 version pictured
Allow room for the 106 × 34 × 17 mm battery body and its attached leads when checking the 2S pack against your battery tray.
CODDAR 2S 2200mAh LiPo battery applications, XT60 version pictured
Use the 2S configuration only with a compatible voltage-rated power system. Aircraft illustrations are application examples, and each purchase contains one battery.
CODDAR 2S 2200mAh LiPo battery front back, XT60 version pictured
The 2S front and rear views distinguish the label side, cell pack and separate power and balance leads. Choose XT60 or T-plug in the connector option.
CODDAR 3S 2200mAh LiPo battery specifications, XT60 version pictured
The 3S pack has a nominal voltage of 11.1 V, an approximate net weight of 185 g and a 4-pin JST-XH balance connector. The pictured power connector is XT60.
CODDAR 3S 2200mAh LiPo battery dimensions, XT60 version pictured
Allow room for the 107 × 34 × 25 mm battery body and its attached leads when checking the 3S pack against your battery tray.
CODDAR 3S 2200mAh LiPo battery applications, XT60 version pictured
Use the 3S configuration only with a compatible voltage-rated power system. Aircraft illustrations are application examples, and each purchase contains one battery.
CODDAR 3S 2200mAh LiPo battery front back, XT60 version pictured
The 3S front and rear views distinguish the label side, cell pack and separate power and balance leads. Choose XT60 or T-plug in the connector option.
CODDAR 4S 2200mAh LiPo battery specifications, XT60 version pictured
The 4S pack has a nominal voltage of 14.8 V, an approximate net weight of 240 g and a 5-pin JST-XH balance connector. The pictured power connector is XT60.
CODDAR 4S 2200mAh LiPo battery dimensions, XT60 version pictured
Allow room for the 107 × 34 × 33 mm battery body and its attached leads when checking the 4S pack against your battery tray.
CODDAR 4S 2200mAh LiPo battery applications, XT60 version pictured
Use the 4S configuration only with a compatible voltage-rated power system. Aircraft illustrations are application examples, and each purchase contains one battery.
CODDAR 4S 2200mAh LiPo battery front back, XT60 version pictured
The 4S front and rear views distinguish the label side, cell pack and separate power and balance leads. Choose XT60 or T-plug in the connector option.
CODDAR 5S 2200mAh LiPo battery specifications, XT60 version pictured
The 5S pack has a nominal voltage of 18.5 V, an approximate net weight of 293 g and a 6-pin JST-XH balance connector. The pictured power connector is XT60.
CODDAR 5S 2200mAh LiPo battery dimensions, XT60 version pictured
Allow room for the 108 × 34 × 40 mm battery body and its attached leads when checking the 5S pack against your battery tray.
CODDAR 5S 2200mAh LiPo battery applications, XT60 version pictured
Use the 5S configuration only with a compatible voltage-rated power system. Aircraft illustrations are application examples, and each purchase contains one battery.
CODDAR 5S 2200mAh LiPo battery front back, XT60 version pictured
The 5S front and rear views distinguish the label side, cell pack and separate power and balance leads. Choose XT60 or T-plug in the connector option.
CODDAR 6S 2200mAh LiPo battery specifications, XT60 version pictured
The 6S pack has a nominal voltage of 22.2 V, an approximate net weight of 355 g and a 7-pin JST-XH balance connector. The pictured power connector is XT60.
CODDAR 6S 2200mAh LiPo battery dimensions, XT60 version pictured
Allow room for the 108 × 34 × 48 mm battery body and its attached leads when checking the 6S pack against your battery tray.
CODDAR 6S 2200mAh LiPo battery applications, XT60 version pictured
Use the 6S configuration only with a compatible voltage-rated power system. Aircraft illustrations are application examples, and each purchase contains one battery.
CODDAR 6S 2200mAh LiPo battery front back, XT60 version pictured
The 6S front and rear views distinguish the label side, cell pack and separate power and balance leads. Choose XT60 or T-plug in the connector option.