Overview
The HRB 6S 22.2V 12000mAh LiPo battery pack is designed to deliver high-capacity 6S power for RC plane, drone, and boat applications. It is rated at 25C continuous discharge and is available with multiple high-current discharge plug options depending on the selected version.
Key Features
- High capacity: 12000mAh
- 6S Li-Po battery voltage: 22.2V
- Continuous discharge rate: 25C
- Balancer connector type: JST-XH
- Multiple discharge connector options: XT90 / XT90S / AS150 / XT150 (female)
Specifications
| Brand | HRB |
| Battery type | Li-Poly (LiPo) |
| Cells | 6S |
| Voltage | 22.2V |
| Capacity | 12000mAh |
| Continuous discharge rate | 25C |
| Energy | 266.4Wh |
| Charging rate | 6A-12A (0.5-1C) |
| Size (L x W x H) | 180 x 70 x 51mm |
| Weight | 1424g |
| Discharge connector (version-dependent) | XT90 / XT90S / AS150 / XT150 (female) |
| Balancer connector | JST-XH |
Battery Use & Charging Guidelines
- Do not overcharge above 4.2V per cell.
- Do not over-discharge below 3.7V per cell.
- New batteries typically reach best performance after 2-3 complete cycles at 1C charge and discharge.
- If the pack does not hold a full charge or loses charge quickly, use a balance charger and cycle the battery several times.
- For most LiPo batteries, a safer charge rate is 6A-12A (0.5C-1C).
- Long-term storage voltage should be around 3.85V per cell; check the battery every 1-2 months.
- A LiPo safety bag is strongly recommended for transport.
- Use a balance charger and do not leave charging unattended.
For compatibility questions (fitment, connector selection, charger setup), contact [email protected] or visit https://rcdrone.top/.
Details

Built for high-capacity 6S performance, this 22.2V 12000mAh pack delivers a steady 25C discharge for demanding RC setups.

Choose the discharge plug version that matches your model, with a JST‑XH balance connector for proper cell balancing during charging.

Key specs at a glance: 12000mAh capacity, 22.2V (6S) voltage, 25C continuous discharge, and JST‑XH balancing.

Sized at 180×70×51mm and weighing about 1424g, it’s easier to confirm fitment in tighter airframes and hull compartments.
