OVONIC 6000mAh 2S 7.4V 90C RC Car LiPo Battery
OVONIC 6000mAh 2S 7.4V 90C RC Car LiPo Battery
OVONIC
تعذر تحميل توفر الالتقاط
OVONIC 6000mAh 2S 7.4V 90C RC Car LiPo Battery
Shop OVONIC batteries for dependable high-discharge power in compatible RC cars, crawlers, trucks, buggies, and touring cars. This 6000mAh 2S1P LiPo pack delivers 7.4V nominal voltage, an 8.4V full-charge voltage, and a 90C discharge rating, with XT60 and Deans/T connector options.
Key Features
- RC car series: intended for compatible ground RC vehicles.
- 90C discharge rating: designed for responsive power delivery.
- Complete wiring details: 12 AWG main power wire and JST-XHR-3P balance connector.
- Two main connector choices: select XT60 or Deans/T. The gallery specification image shows the XT60 version; the selected variant determines the supplied main connector.
- Manufacturer-described stacked-cell construction: presented by OVONIC as supporting higher energy density, longer runtime, reduced swelling tendency, and lower internal resistance. Results vary with conditions and use.
Why Choose OVONIC Stacked-Cell LiPo Technology?
OVONIC presents its stacked-cell construction as an RC power solution designed around five practical priorities: higher energy density, strong discharge capacity, longer cycle life, safe and stable operation, and low internal resistance. Together, these characteristics support responsive acceleration and more consistent power delivery for demanding 2S RC car setups.
- Higher energy density: more usable energy in a compact battery format.
- Longer-running power: durable cells are designed to help extend driving time when correctly charged and maintained.
- Lower internal resistance: supports efficient current delivery under load.
- Stacked-cell construction: OVONIC's manufacturer comparison reports 6% higher energy density, 12% longer runtime, 8% lower swelling tendency, and 4% lower internal resistance than the compared conventional wound-cell design.
The percentages above are manufacturer comparative figures shown in the supplied product materials. Actual performance varies with vehicle load, gearing, charger, temperature, driving style, and battery care.
Specifications
| Brand | OVONIC |
|---|---|
| Product line | RC Car Battery |
| Battery chemistry | LiPo |
| Configuration | 2S1P |
| Capacity | 6000mAh |
| Nominal voltage | 7.4V |
| Full-charge voltage | 8.4V |
| Nominal energy | 44.4Wh |
| Discharge rating | 90C |
| Dimensions | 130.3 × 40 × 21.8 mm |
| Net weight | 251g |
| Main power wire | 12 AWG |
| Balance/charging connector | JST-XHR-3P |
| Main discharge connector options | XT60; Deans/T |
Connector and Charging Lead Details
The heavy-gauge red and black 12 AWG leads carry discharge current through the selected XT60 or Deans/T connector. The smaller JST-XHR-3P plug is the 3-pin balance connector for this 2S pack and connects to the matching balance port on a compatible LiPo balance charger. Always verify polarity before use.
Compatibility
Suitable for RC cars, crawlers, trucks, buggies, and touring cars that accept a 2S 7.4V LiPo pack measuring 130.3 × 40 × 21.8 mm. Confirm compartment dimensions, voltage, polarity, and connector before ordering.
Charging and Safety
- Use a LiPo-compatible balance charger with the correct 2S program.
- Do not exceed 4.2V per cell or 8.4V for the pack.
- Allow the pack to cool before charging and never charge unattended.
- Stop using a swollen, damaged, overheated, or leaking pack.
- Store in a cool, dry, fire-resistant location at approximately 3.8–3.9V per cell.
Package includes: 1 × OVONIC 2S 6000mAh 90C LiPo battery with the selected main connector.
Details
