2× Ovonic Rebel 3S 6400mAh 11.1V 60C LiPo Battery Pack EC5 + JST-XH Balance for ARRMA 3S RC Cars
2× Ovonic Rebel 3S 6400mAh 11.1V 60C LiPo Battery Pack EC5 + JST-XH Balance for ARRMA 3S RC Cars
Ovonic
تعذر تحميل توفر الالتقاط
Overview
This 2-pack Ovonic 3S LiPo battery pack set is designed for RC car use, featuring 6400mAh capacity, 11.1V nominal voltage, and an EC5 plug. It is specified to fit ARRMA 3S models and some 6S cars when voltage and connector type match.
Key Features
- High-capacity 6400mAh RC car battery pack design
- EC5 discharge connector and JST-XH balance/charge plug
- 3S1P configuration with 11.1V nominal voltage
- Battery label shows 71.04Wh energy rating
Specifications
| Brand | Ovonic |
| Chemistry | Li-Polymer |
| Configuration | 3S (3S1P printed on label) |
| Nominal Voltage | 11.1V |
| Capacity | 6400mAh |
| Energy | 71.04Wh (printed on label) |
| Discharge Rate | 60C |
| Max Burst Discharge Rate | 120C |
| Balance/Charge Plug | JST-XH |
| Discharge Plug | EC5 |
| Net Weight (dev.20g) | 407g (per 1 pack) |
| Dimensions | 154 x 46 x 26 mm (L x W x H) |
| Length Tolerance | dev.5mm |
| Width Tolerance | dev.2mm |
| Height Tolerance | dev.2mm |
Note: The battery label may show a different C-rating print (e.g., 50C). This listing specification is 60C continuous and 120C burst.
What's Included
- 2× Ovonic 3S 6400mAh 11.1V LiPo Battery Pack (EC5)
- 1× User Manual
Applications
- ARRMA 3S RC cars (connector and voltage must match)
- Other RC cars that use 3S (11.1V) LiPo with EC5 and sufficient battery tray space
Charging & Safety Notes
- Compatibility depends on both voltage and plug type.
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V and 4.2V).
- Before use, check that the battery surface is intact and that the voltage is normal.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger to charge and cycle it several times.
For product selection or after-sales support, contact [email protected] or visit https://rcdrone.top/.
Details
Two-pack 3S 6400mAh LiPo set for RC cars, using an EC5 discharge connector and a JST‑XH balance plug.
EC5 and JST‑XH connectors make it easy to match common 3S setups and balance-charge safely.
Includes two battery packs plus a user manual for setup, charging, and care.
Battery size is 154 × 46 × 26 mm with a listed weight of 407 g per pack for tray-fit checks.
A quick visual comparison highlights the 6400mAh capacity for longer run time versus typical lower-capacity packs.
Built for high-capacity performance and steady power delivery in RC car applications.
Connector type and voltage must match your model—commonly used with ARRMA 3S platforms when fitment allows.
Label details include 3S/11.1V and 71.04Wh; some packs may print a different C-rating on the sticker.
