Skip to product information
1 ل 9

واقي الجيمبال STARTRC لطائرة DJI Air 3S – غطاء حماية للعدسة، واقي جيمبال ضد الصدمات، PC، 91.5×78.3×104.8 مم، 28 جم

واقي الجيمبال STARTRC لطائرة DJI Air 3S – غطاء حماية للعدسة، واقي جيمبال ضد الصدمات، PC، 91.5×78.3×104.8 مم، 28 جم

StartRC

سعر عادي $9.39 USD
سعر عادي $0.00 USD سعر البيع $9.39 USD
أُوكَازيُون نفذ
Taxes included. الشحن محسوب عند السداد.
العنوان الافتراضي
عرض التفاصيل الكاملة

نظرة عامة

هذا STARTRC واقي الجيمبال مصمم خصيصًا لطائرة DJI Air 3S. يعمل كغطاء واقي لعدسة الكاميرا وواقي جيمبال مضاد للاصطدام، مما يوفر حماية متكاملة للجيمبال والكاميرا وأجهزة الاستشعار الأمامية أثناء التخزين والنقل. تصميمه القابل للتثبيت بسهولة يناسب بدقة، مما يساعد على منع الانفكاك العرضي وحماية التجميع دون خدش الطائرة.

الميزات الرئيسية

  • تناسب دقيق لكاميرا جيمبال DJI Air 3S؛ قالب مستقر وقوي مع تركيب آمن.
  • مصنوع من مادة PC ذات قوة عالية؛ متين ومقاوم للتآكل.
  • وسادات سيليكون على الجانبين والمنطقة العلوية تساعد في حماية الطائرة عند تركيب أو إزالة الواقي.
  • حماية متكاملة: مقاوم للغبار، مقاوم للخدوش، ومقاوم للاصطدام.
  • مصمم بحيث لا يؤثر على التخزين؛ يناسب الحقائب الأصلية ومعظم الحقائب المحمولة وصناديق مقاومة للماء وحقائب الظهر.
  • تركيب وإزالة بخطوة واحدة؛ ارفع للإفراج دون أن تعلق العدسة.
  • يحمي كاميرا الجيمبال أثناء التخزين والنقل لتمديد عمر الخدمة.

المواصفات

العلامة التجارية STARTRC
نوع المنتج حامي الجيمبال
رقم الموديل حامي الجيمبال dji air 3s
علامة الطائرة المتوافقة DJI
المادة PC
اللون رمادي
الحجم 91.5*78.3*104.8mm
الوزن الصافي 28غ
الشهادة لا يوجد
المنشأ الصين البر الرئيسي
العبوة نعم

ما الذي يتضمنه

  • غطاء واقي × 1

التطبيقات

  • حماية جيمبال DJI Air 3S والكاميرا والمستشعرات أثناء التخزين والنقل.

التفاصيل

STARTRC Air 3S Gimbal Protector, Silicone pads protect drone during installation and removal of protector.STARTRC Air 3S Gimbal Protector, PC construction with high toughness and durability.STARTRC Air 3S Gimbal Protector, Device provides integrated protection against dust, scratches, and collisions.STARTRC Air 3S Gimbal Protector, One-step installation and removal of lenses, with lift-to-release mechanism to prevent sticking.STARTRC Air 3S Gimbal Protector, Integrated device features dustproof, scratch-resistant, and collision-resistant design for added protection.STARTRC Air 3S Gimbal Protector, DJI Air 3S Gimbal Protector by STARTRC protects DJI Air 3S gimbal, camera, and sensors during storage and transportation.STARTRC Air 3S Gimbal Protector, The protective cap guards the gimbal, camera, and front sensors from damage during storage and transport.STARTRC Air 3S Gimbal Protector, One-step install and removal with easy lifting mechanism prevents lens from getting stuck.STARTRC Air 3S Gimbal Protector, Silicone pads provide protection for drones during installation and removal of protectors.STARTRC Air 3S Gimbal Protector, Silicone pads on both sides and top prevent damage to drone during installation or removal of protector.STARTRC Air 3S Gimbal Protector, Attach part ① to drone, clip ② to bottom; remove by pulling lever ③. Install/remove only when powered off. Improper use voids warranty.

تركيب واقي الجيمبال: قم بتوصيل الجزء ① بالطائرة بدون طيار، ثم قم بتثبيت ② في الأسفل. الإزالة: اسحب الذراع ③، واستخرج الغطاء. قم بالتركيب/الإزالة فقط عندما تكون الطائرة بدون طيار مطفأة. الاستخدام غير السليم يلغي المسؤولية.

STARTRC Air 3S Gimbal Protector, The snap-on design ensures precise fit, preventing accidental loosening and protecting the aircraft during assembly.STARTRC Air 3S Gimbal Protector, 80x82x96mm