GEPRC DarkStar22 O4 Pro CineWhoop FPV Drone with DJI O4 Air Unit Pro, ELRS 2.4G, 2-4S AIO

Overview

GEPRC DarkStar22 O4 Pro is a CineWhoop FPV Drone designed for compact, portable performance, featuring the DJI O4 Air Unit Pro VTX system for HD transmission and up to 4K 120fps recording support. It uses the TAKER F405 20A ELRS2.4 2-4S AIO flight system with an integrated ELRS 2.4G receiver, plus a five-point damping structure designed to improve anti-vibration performance for stable footage.

Key Features

• Equipped with O4 Pro HD VTX: supports up to 4K 120fps recording.
• Built-in Receiver: directly bind and fly with ELRS 2.4G; no external receiver required.
• 5-Point Damping Ultra-Stable Footage: innovative structural design significantly improves anti-vibration performance, ensuring every frame stays rock-steady.
• Dazzling Light Strips: COB strip with Mini controllable BEC; three brightness levels.
• Reserved GPS Mount: reserved GPS space within a compact body, improving flight positioning and outdoor safety. Note: All versions do not include GPS by default; purchase and install separately.
• Flight controller/ESC: Compact F405 BGA processor with 20A ESC delivers strong, stable flight performance.
• Clear Pad Markings: each solder pad is clearly labeled for quick recognition and efficient installation.
• Easy Disassembly with Six Screws: remove six screws to separate the upper and lower body for inspection and component replacement.
• Two options available: O4 Air Unit Pro Version / WTFPV Version (without VTX).

Customer service: https://rcdrone.top/ or support@rcdrone.top.

Specifications

Flight time note: all flight times are tested under smooth cruising conditions. Actual duration may vary due to firmware version, pilot skill, and environmental factors. Data is for reference only.

Setup Notes (LED/Mini BEC Control)

To use the controllable Mini BEC and LED strip, enter the following commands in Betaflight CLI:

resource SERIAL_TX 5 none
resource PINIO 2 C12
set pinio_config = 129,1,1,1
set pinio_box = 39,40,41,42
save

After flashing, enable the channel in the Modes tab.

Applications

• Indoor
• Party
• Sports
• Park
• Forest

What’s Included

Product List (shown: O4 Pro ELRS 2.4G version; actual accessories may vary by configuration):

• DarkStar22 Drone x 1
• Prop Guard (Black) x 1
• Canopy (Grey) x 1
• Camera Cover (Grey) x 1
• Battery Pad x 1
• Gemfan 2219-3 Props (pairs) x 2
• 10*120mm Battery Strap x 1
• L-shaped Hex Wrench 1.5mm x 1
• Battery Anti-slip Pad x 2
• Damping Ball Punch Tool x 1
• Binding Pin x 1
• USB Adapter Board x 1
• 5P Terminal Cable x 1

Spare Screw Pack Includes:

• Damping Balls x 2
• M2*7 Round-head Screws x 4
• M2*6 Round-head Screws x 4
• M2*4 Round-head Screws x 4
• M2*7 Countersunk Self-Tapping Screw x 4
• M2*6 Round-head Screws x 4
• M2*5 Round-head Screws x 4

Details

Features O4 Pro HD VTX for 4K 120fps, built-in ELRS 2.4G receiver, TAKER F405 20A flight controller, SPEEDX2 1104 7500KV motors, and Gemfan 2219 propellers designed exclusively for DarkStar22.

5-Point Damping ensures ultra-stable footage with anti-vibration design.

Dazzling LED light strips with controllable Mini BEC offer three brightness levels. Setup requires Betaflight CLI commands for resource and pin configuration, then enable channel in Modes tab after flashing.

Reserved GPS mount enhances outdoor flight safety. Compact design improves positioning. GPS sold separately. Orange component visible on transparent drone body.

Indoor safety, outdoor freedom: party, sports, park, forest scenes.

TAKER F405 processor with 20A ESC ensures strong, stable flight. Supports ELRS 2.4GHz and 2–4S AIO. Compact BGA design optimizes performance for FPV drones.

Clear pad markings enable easier assembly. Each solder pad is labeled for quick recognition and efficient installation, supporting motor connections, power, and signal inputs on the GEPRC DarkStar22 O4 Pro CineWhoop FPV board.

Easy disassembly with six screws for inspection replacement

Two versions: O4 Air Unit Pro and WTFPV (no VTX). Orange drones with black frames displayed on dark reflective surface.

DarkStar22 O4 Pro and WTFPV specs compared: frame, flight system, motors, battery, weight. O4 Pro includes DJI camera/VTX; WTFPV lacks those. Flight time 6m45s. Weight: 126.8g vs 93g. Tested under cruising conditions.

DarkStar22 O4 Pro ELRS 2.4G FPV drone kit with frame, props, straps, screws, and accessories; configurations may vary.

DarkStar22 Drone kit includes one drone, prop guard, canopy, camera cover, battery pad, two pairs of props, strap, wrench, anti-slip pads, punch tool, binding pin, USB board, and terminal cable.

Spare Screw Pack includes damping balls (x2), various M2 round-head screws (x4 each: 7mm, 6mm, 4mm, 5mm), and M2*7 countersunk self-tapping screw (x4). All items listed with quantities for replacement purposes.