MAD BSC2207.5 V1.0 FPV Drone Motor 12N14P, 4mm Shaft, 16xM3 Mount, 1750KV/1950KV/2100KV

Overview

MAD BSC2207.5 V1.0 FPV drone motor for multirotor builds, with 12N14P configuration and multiple KV options (1750KV-6S, 1950KV-6S, 2100KV). Mechanical specs include D:27 × 32.3 mm size, M5 nut prop mounting, and D:16 M3×4 motor mounting holes.

Key Features

• Rotor balance: ≤5 mg
• Shock absorbing design (reduces motor vibration and extends bearing life)
• High slot fill rate (rapid and powerful response)
• N52H arc-shaped magnet
• Linear low-torque power output (faster response and more power in low-throttle situations)

Specifications

Motor Data (Common)

1750KV (6S) Specifications

Test condition note: Data measured with an input voltage of 24 V, at a temperature of 25°C and sea level. The rotational speed was adjusted by the throttle. Maximum thrust may depend on battery level, propeller type, air pressure, and other conditions.

1750KV (6S) Performance Table (ID: 51466)

1750KV (6S) Performance Table (ID: 51477)

1950KV (6S) Specifications

Test condition note: Data measured with an input voltage of 24 V, at a temperature of 25°C and sea level. The rotational speed was adjusted by the throttle. Maximum thrust may depend on battery level, propeller type, air pressure, and other conditions.

1950KV (6S) Performance Table (ID: 51466)

1950KV (6S) Performance Table (ID: 51477)

2100KV (6S) Specifications

Test condition note: Data measured with an input voltage of 24 V, at a temperature of 25°C and sea level. The rotational speed was adjusted by the throttle. Maximum thrust may depend on battery level, propeller type, air pressure, and other conditions.

2100KV (6S) Performance Table (ID: 51466)

What’s Included

• BSC2207.5 motor × 1
• M5 nut × 1
• M3 × 8 mm cuphead screw × 4
• Gasket × 1
• O-ring × 1
• M3 × 5 mm pan head screw × 1
• MAD sticker × 6

Applications

• Power for 5" long-range FPV drones
• Recommended accessories (reference): motors 2207 / 2207.5 / 2305 / 2306 / 2407; ESC 35A-60A (BL-32 60A 6S 4IN1 ESC); propeller 6 inch; battery 4S 1500mAh, 6S 1300mAh

For compatibility questions (ESC, propeller, battery, or frame mounting), contact support@rcdrone.top or visit https://rcdrone.top/.

Details

MAD BSC2207.5 V1.0 motor dimensions include a 27mm body diameter, 32.3mm overall height, M5 shaft, and a 16mm M3x4 mounting pattern.

The MAD BSC2207.5 V1.0 motor kit includes mounting screws, an M5 nut, gasket, O-ring, and MAD stickers for installation.

The MAD BSC2207.5 V1.0 FPV drone motor features a threaded shaft and open-frame design for straightforward mounting.

The MAD BSC2207.5 V1.0 FPV drone motor features a threaded shaft and a clearly marked KV1950 rating for easy identification during builds.

The MAD BSC2207.5 V1.0 FPV drone motor features a compact, low-profile build with clear MAD Components labeling for easy identification during setup.

The MAD BSC2207.5 V1.0 FPV drone motor features a shock-absorbing design to help reduce vibration during flight.

The MAD BSC2207.5 V1.0 FPV drone motor uses a high slot fill rate winding design with tightly packed copper coils.

The MAD BSC2207.5 V1.0 motor uses N52H arc-shaped magnets in the bell for a compact, durable FPV power setup.

MAD Motor offers a range of FPV motor series including BSC, FS, CM (Cinematic), and X-Class options for different build styles.

The MAD BSC2207.5 V1.0 motor is rated at 1750KV and 35.3g, with performance data listed for 6S setups.

MAD BSC2207.5 V1.0 motor documentation lists the 1950KV option with 6S test curves and thrust/current data to help with prop and tune selection.

The MAD BSC2207.5 V1.0 motor is labeled 2100KV and 35g, with a 6S performance chart and thrust data up to 1.81 kg.