Ovonic 120C 2S2P 6000mAh 7.4V LiPo Battery Pack with Deans T Plug for RC Car & Truck
Ovonic 120C 2S2P 6000mAh 7.4V LiPo Battery Pack with Deans T Plug for RC Car & Truck
Ovonic
در دسترس بودن پیکاپ بارگیری نشد
Overview
The Ovonic 120C 2S2P 6000mAh 7.4V LiPo battery pack is designed for RC car power systems and uses a Deans T (Deans plug) main connector plus a 3-pin balance lead. The pack is labeled 44.4Wh and comes in a soft case.
Key Features
- 6000mAh capacity, 2S2P configuration, 7.4V nominal
- Discharge rate: 120C (max burst: 240C)
- Main connector: Deans T (Deans plug)
- Balance/charge connector: JST-XHR-3P (listed as JST-XH in provided specs)
- Soft-case pack
- Performance claims shown: +12% longer running time, -5% lighter weight, -4% lower resistance; “ISO International Quality Certification”
- Additional advantages listed: long cycle life, faster charging time, higher discharge capacity, higher performance in power, high rate discharge current
Specifications
| Brand | Ovonic |
| Chemistry | Li-Polymer |
| Configuration | 2S2P |
| Nominal Voltage | 7.4V |
| Capacity | 6000mAh |
| Energy | 44.4Wh |
| Discharge Rate | 120C |
| Max Burst Discharge Rate | 240C |
| Balance/Charge Plug | JST-XHR-3P (JST-XH) |
| Discharge Plug | Deans T (Deans plug) |
| Net Weight | 295 g (0.65 lb), tolerance 20 g |
| Length | 88 mm (3.4 inch), tolerance 5 mm |
| Width | 43 mm (1.7 inch), tolerance 2 mm |
| Height | 37 mm (1.4 inch), tolerance 2 mm |
| Case Type | Soft case |
What's Included
- 1x Ovonic 120C 2S2P 6000mAh 7.4V LiPo Battery (Deans T / Deans plug)
- 1x User manual
- 1x Packing box
- Ovonic brand stickers
Compatibility
- General guidance: fit depends on matching voltage and connector type (Deans T main plug and 3-pin balance lead).
- Models listed in the compatibility text: eachine E30 / E30W RC quadcopter; Syma X5 / X5C / X5SC / X5SW RC quadcopter; JJRC H5C / H5P / H10 / H9D RC quadcopter; Cheerson CX30W RC quadcopter.
Charging & Safety Notes
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V and 4.2V).
- Before use, check that the battery surface is intact and that voltage is normal.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.
For product support and pre-purchase connector/fitment questions, contact [email protected] or visit https://rcdrone.top/.
Details
Built for RC power setups, this 2S2P 6000mAh pack delivers 7.4V with a Deans T main connector and a 3‑pin JST-XH/XHR balance lead.
High-discharge 120C output supports punchy acceleration while keeping the soft-case pack compact for tight battery trays.
Compatibility depends on matching the 7.4V 2S voltage and using a Deans T connector plus a 3‑pin balance port.
The box includes the 6000mAh 7.4V pack, user manual, packing box, and Ovonic stickers for your setup.
