Overview
This set includes 2 x OVONIC 11.1V 450mAh 80C 3S (3S1P) long-size LiPo battery packs with an XT30 plug for small to medium FPV drones used in racing, freestyle, cinewhoop, and tiny whoop setups. Each pack is rated at 80C discharge and is designed to provide responsive throttle performance in compact builds where size and weight matter.
Key Features
- 3S power system: 11.1V nominal, 3S1P configuration
- High discharge rating: 80C
- Compact long-size format: 62.1mm x 16.4mm x 19mm (L x W x H)
- XT30 main connector for power connection
- JST-XHR-4P balance connector
- 16 AWG lead wire
- Manufacturer comparison graphics (as stated): “Stacking Technology” vs “Winding Technology” with +6% higher energy density, +12% longer running time, -8% lower battery swelling, and -4% lower internal resistance (compared to “Others”).
Specifications
| Brand | OVONIC |
| Battery type | LiPo |
| Voltage | 11.1V |
| Capacity | 450mAh |
| Energy | 5.00Wh |
| Discharge rate | 80C |
| Configuration | 3S1P |
| Dimensions (L x W x H) | 62.1mm x 16.4mm x 19mm (2.45in x 0.65in x 1.75in) |
| Net weight | 39g (0.08lb) per pack |
| Main connector | XT30 plug |
| Balance connector | JST-XHR-4P |
| Wire gauge | 16 AWG |
What's Included
- 2 x OVONIC 11.1V 80C 450mAh LiPo Battery (XT30 plug)
- 1 x User Manual
- 1 x Packaging Box
- 2 x Brand Stickers
For fitment help (voltage, dimensions, and connector matching), contact [email protected] or visit https://rcdrone.top/.
Applications
- Small to medium FPV drones (commonly cited for 2-inch to 4-inch builds, where 3S 450mAh XT30 fits)
- Examples mentioned: iFlight Chimera4, BetaFPV 85X, BetaFPV 95X V3, Emax Tinyhawk 2, Emax Tinyhawk 2 Freestyle, GEPRC CineBee 3", iFlight Protek 25 (verify connector, size, and voltage before use)
- Also used in RC models where voltage, dimensions, and plug match (airplane, boat, car, truck, and other vehicles)
Charging & Safety Notes
- For an RC battery pack, it will fit only when the voltage and plug match.
- Stop charging immediately when the cell voltage reaches 4.2V (normal cell voltage is 3.7V to 4.2V).
- Before first use, check that the battery surface is intact and that the voltage is normal.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.
Performance chart shown on product materials: “OVONIC VS OTHERS” radar chart lists Energy Density, Discharge Capacity, Cycle Life, Safety, and Lower Internal Resistance.
Details

The long-format 3S 450mAh pack keeps weight low while using an XT30 main lead, JST-XHR balance plug, and 16AWG wire for compact FPV builds.

OVONIC’s stacking-technology comparison highlights gains in energy density and running time, with lower swelling and internal resistance versus typical winding construction.

Performance comparison across key metrics—energy density, discharge capacity, cycle life, safety, and lower internal resistance.

Suitable for FPV drones and other RC models when the voltage, dimensions, and connector type match your setup.

Each set includes two battery packs plus the retail box, user manual, and OVONIC stickers.
