T-Motor VL1180 KV60 VTOL UAV Motor (24S) 88kg Max Thrust/Arm - Specs, Drawings & Downloads

Name: T-Motor VL1180 KV60 VTOL UAV Motor (24S) 88kg Max Thrust/Arm - Specs, Drawings & Downloads
Brand: T-MOTOR
SKU: VL1180
Price: 1328.60 USD
Availability: InStock

T-Motor VL1180 KV60 VTOL UAV Motor (24S) 88kg Max Thrust/Arm - Specs, Drawings & Downloads

T-MOTOR

$1,328.60 USD

فروش فروخته شده

Taxes included. حمل و نقل هنگام تسویه حساب محاسبه می شود.

تعداد

مشاهده جزئیات کامل

Overview

The T-Motor VL1180 KV60 is a VTOL UAV motor designed for high-thrust propulsion on 24S LiPo platforms, rated up to 88 kg max thrust per arm. It is part of the VL series propulsion system and is matched with the VL300A ESC and VZ45 propeller specifications provided below.

Key Features

Fast and economical propeller locking

360° custom angle propeller-locking helps avoid turbulence from rotor rotation and supports stable aerodynamic layout for fixed-wing aircraft.
Adaptive propeller locking: ESC adjusts current to control torque based on external force changes, reducing power consumption and heat.
Propeller-locking power consumption is approximately 10 W.

Protection and monitoring

Dust-proof mesh and optimized motor structure are stated to elevate protection to IP45 in the VL series feature description.
Motor specification lists IP rating as IPX5.
Temperature feedback & real-time monitoring (stable and controllable operation under high load).
Centrifugal cooling design: YES.

Specifications

Motor: VL1180 KV60

Model No.	VL1180 KV60	KV (RPM/V)	60
Motor Size	Dia. 120.5*96 mm	Configuration	36N40P
Rated Voltage (LiPo)	24S	Max Thrust	88 kg
Continuous Power (180 s)	4500 W	Peak Current	254 A
Idle Current (15 V)	4.2 A	Internal Resistance (25°C)	14 mΩ
Ambient Temperature	-30~55°C	Motor Weight (Incl. Cable)	2680 g
Magnet Level	180°C	Copper Wire	200°C
Stator	150°C high temperature-resisting coatings	Coil Insulation Test	1000 V/5 s
Shaft Diameter	IN: 17	Rotor Dynamic Balance Standard	≤20 mg
Bearing	Imported 6903	IP	IPX5
Lead Cable	Enameled wire 150 mm	Package Size	242152132 mm
Centrifugal Cooling Design	YES

ESC Specs: VL300A 24S

Model No.	VL300A 24S	Control	PWM/CAN
Max Voltage	108 V	Protocol	CAN
Peak Current (10 s)	300 A (open environment and temperature ≤60°C)	Continuous Current	150 A (under certain heat dissipation conditions)
Propeller-Locking	Electronic propeller-locking	Standby Consumption	≤15 mA
Throttle Pos. Range	1100~1940 us (fixed)	Throttle Refresh Frequency	50~500 Hz
Throttle Response Speed	300 ms	Weight (Excl. Cable)	825 g
Encoder Cables	M6-4 aviation connector - 465±10 mm	Output Cable	Silicone wire - black - 7AWG - 290±10 mm
Input Cable	Silicone wire - red/black - 7AWG - 1950±15 mm	Signal Cable	Shielded cables - black - OD4.2 - 5C - 2030±15 mm - JP-3P*2

Prop Specs: VZ45

Model No.

VZ45*18 Inch (1143*457.2 mm)

Weight (Single Blade)

320 g

Recommendation

Voltage	24S	Max Thrust/Arm	88 kg
Recommended MTOW (Quad)	140~150 kg compound-wing

Technical Drawing Callouts (mm)

Motor	Dia. 120.5; length 96; 83.9; 3; Dia. 70; Dia. 50; Dia. 11; 16; 20; 6Dia. 10 deep 0.5; 6Dia. 5.1 through holes; 5M5; Dia. 34; 4M6
ESC	66; 148; 47; 164.5; 21; 157; 31.5; Dia. 3.2; terminals labeled GND/VCC; phase leads A/B/C
Propeller	1148.9; 94.1; 41.8; hub holes Dia. 34 / Dia. 11 / Dia. 5

For integration support (ESC setup, CAN/PWM wiring, or parts verification), contact support@rcdrone.top or visit https://rcdrone.top/.