Raspberry Pi 5 Heat Sink Set - Dedicated Copper Heatsinks (4pcs) w/ Thermal Adhesive for SBC Cooling
Raspberry Pi 5 Heat Sink Set - Dedicated Copper Heatsinks (4pcs) w/ Thermal Adhesive for SBC Cooling
Yahboom
Impossible de charger la disponibilité du service de retrait
Overview
This Raspberry Pi 5 heat sink set includes dedicated copper heat sinks for key chips and is supplied with thermal adhesive for simple stick-on installation. It is recommended to use the heat sinks together with a cooling fan to improve overall heat dissipation and help maintain stable performance during prolonged high-load operation.
Key Features
- Designed for Raspberry Pi 5
- Material: copper heat sinks
- 1 set = 4 pieces
- With thermal adhesive
- Tailor-made sizing; not recommended to exchange heat sinks between Raspberry Pi 5 and Raspberry Pi 4B
Specifications
Heat sink sizes (Unit: mm)
| Piece | Length | Width | Height |
|---|---|---|---|
| Copper heat sink | 17 | 17 | 5 |
| Copper heat sink | 15 | 10 | 5 |
| Copper heat sink | 12 | 12 | 5 |
| Copper heat sink | 6 | 6 | 5 |
Raspberry Pi 5 heat dissipation test (CPU temperature, degC)
| Test condition | CPU idle | CPU fully loaded |
|---|---|---|
| No heat sink, no fan | 65 | 85 |
| With heat sink, no fan | 65 | 85 |
| No heat sink, with fan | 50 | 73 |
| With heat sink and fan | 48 | 67 |
Note: The data above is obtained in summer, and the ambient temperature is relatively high.
Material comparison data (as provided)
| Material | Heat conductivity (W/m*K) | Specific heat capacity (kJ/kg*K) | Density (g/cm3) |
|---|---|---|---|
| Copper | 401 | 386 | 8.9 |
| Aluminum | 237 | 900 | 2.7 |
What's Included
- Copper heat sink set (1 set = 4 pieces)
Installation Notes
- Peel off the thermal adhesive backing and stick each heat sink onto the corresponding chip.
- It is not recommended to attach a heat sink to the power management chip area due to surrounding electronic components and short-circuit risk.
- The I/O control chip generates a high amount of heat and is close to the CPU and memory; attaching a heat sink is recommended for overall heat dissipation.
- For best results, use a cooling fan together with the heat sinks. Under the provided test conditions, using both reduced CPU temperature by 2-6 degC.
For compatibility or installation questions, contact support@rcdrone.top or visit https://rcdrone.top/.
Details
Skip caption—this banner is not a product detail image for the heat sink set.
Four-piece copper heat sink set for Raspberry Pi 5, supplied with thermal adhesive for quick installation.
Skip caption—already covered by the overview and features text.
Skip caption—this supports the general need for cooling and is explained in the main text.
Cooling test results comparing CPU idle and full load temperatures with and without heat sinks and a fan.
Copper is used for higher thermal conductivity compared with aluminum, supporting faster heat transfer to airflow.
Skip caption—installation guidance is provided in the notes section.
Skip caption—compatibility guidance is already stated in the product description.
Apply the thermal adhesive pads to the matching chips, and avoid the power-management area to reduce short-circuit risk.
Four copper heat sink sizes are included to match key Raspberry Pi 5 chips: 17×17×5, 15×10×5, 12×12×5, and 6×6×5 mm.
Skip caption—package contents are already listed in the description.
Real product photos show the four copper heat sinks and an example installation on a Raspberry Pi 5.
Related Collections
