Kpower MM0160 Metal-Gear Micro Servo, 3 kg·cm at 6 V for RC Models and Robotic Grippers

Kpower

$35.00 USD

Jualan Habis dijual

Cukai termasuk. Penghantaran dikira semasa pembayaran.

Version MM0160

Kuantiti

Lihat butiran penuh

Overview

The Kpower MM0160 is a metal-gear micro servo for RC models, UAV mechanisms, micro robots and robotic grippers. Its 23 × 12 × 30 mm body weighs 15.5 g and uses a brushed DC motor. Torque is specified as 2 kg·cm at 4.8 V and 3 kg·cm at 6.0 V, with corresponding speeds of 0.14 and 0.12 s/60°, helping match actuation requirements to the supply voltage.

Features

Metal gears driven by a brushed DC motor, with potentiometer position sensing.
Externally splined output shaft with a threaded center opening; horn spline specification: 25T, Ø4.9 mm.
Two mounting tabs with holes for mechanical attachment.
Silver-colored center housing with black end sections.
120° travel angle, with customization stated for the travel range.
PWM, TTL and RS-485 protocols listed.

Specifications

Voltage-Dependent Torque and Speed

Parameter	At 4.8 V	At 6.0 V
Torque	2 kg·cm	3 kg·cm
Speed	0.14 s/60°	0.12 s/60°

General Specifications

Parameter	Value
Brand / model	Kpower MM0160
Product type	Metal-gear micro servo
Stall torque	3 kg; torque unit supplied without a moment-arm unit
Rated torque	0.8 kg; torque unit supplied without a moment-arm unit
No-load speed	0.12 s; angular interval and supply voltage not specified for this entry
Weight	15.5 g
Dimensions	23 × 12 × 30 mm; axis order unspecified
Travel angle range	120°; customizable
Operating voltage	4.8–8.4 V
Horn gear spline	25T, Ø4.9 mm
Gear material	Metal
Motor	Brushed DC
Protocols	PWM / TTL / RS-485
No-load current	1200 mA
Position sensor	Potentiometer
Case material	Plastic
Ball bearings	2BB
Working frequency	50–333 Hz
Operating temperature	−10 to 50 °C
IP rating	IP42

Applications

RC aircraft and UAV mechanisms: Compact actuation for model-aircraft linkages, including fixed-wing RC aircraft, where the 15.5 g weight helps limit added mechanism mass.
RC cars, boats and ships: Linkage actuation in model mechanisms, including the listed 1/8- and 1/10-scale RC car applications; the splined output provides a horn attachment interface.
Micro robots and robotic grippers: Positioning compact joints and gripper linkages using the metal gear train and potentiometer feedback.
Intelligent medical-device mechanisms, including endoscopes: Small positioning mechanisms where the 23 × 12 × 30 mm form factor is relevant to mechanical integration.