FLYSKY FS-G7P G7P 2.4G 7CH ANT Protocol Radio Transmitter SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Remote Control Peripherals/Devices: Remote Controller

Recommend Age: 12+y,14+y

Quantity: 1 pcs

Plastic Type: ABS

Origin: Mainland China

Model Number: FS-G7P

Material: Plastic

For Vehicle Type: Cars

Brand Name: FLY SKY

VR1 Knob SW1 TR-X/Y/Z Display y Five-way switch Hurded percend Ambient LED Power CH1 SW3 Three-position CH2 toggle switch TRI:Function adjustment VRZ three-position knob SW2 Tact switch/Key Battery box-four AA batteries,compatible with the placement oflithium batteries: Key - 63 OYAZ

About 78% of the parts are from a sponge-like material. (Systematic testing shows that 251 units out of 1,000 have no issues or defects. Factory update: approximately 2014-46.)

Adaptive Transmitter: FS-G7P (Adapts to transmitters using ANT protocol). RF Frequency: 2.4 GHz ISM (Maximum Power: 20 dBm).

FS-R7P is a receiver based on the ANT protocol, which provides seven channels. It features an external single antenna and can output PWM, PPM, i-BUS, or S.BUS signals.

FCC ID: ZAZUNRTPOO; Compliance with FCC Regulations 2.48GHz + LANT 2 (Device Binding: 3.5V-9V/DC Power Supply); LED Flashing Detail Drawing Back FS-R7D.

FS-R7D is a light group receiver that complies with the ANT protocol. It features an external single antenna and supports two-way transmission and back-channel functionality.

FS-RZV is a receiver based on the ANT protocol that provides seven channels and bidirectional transmission capabilities. It features an external single antenna with a built-in gyroscope and compact design, making it adaptable to a wide range of model cars or boats.

The FS-G7P transmitter features a five-way switch with trim for preset direction adjustment. The receiver also has a steering wheel control interface that includes display functions, such as ambient LED indicators, and provides navigation through UP/DOWN/LEFT/MIDDLE/OK options.

The battery box requires four AA batteries, which are compatible with lithium batteries (503 and 504). Additionally, the battery box can accommodate AA-rated batteries with a capacity of up to 5V.

The power supply unit (PSU) is a high-quality 9V DC adapter compatible with 2S lithium-polymer (LiPo) batteries or 4x AA alkaline batteries.

[15] Type C USB interface: Firmware upgrade; USB emulator; and system supply . [16] Fixed port for the holder ofa mobile phone .

The LS-CIP FNT features an excellent UI design with a lightweight and compact construction, weighing only 30.5g; it also includes a built-in single antenna that is resistant to damage due to its integrated design.

The power module provides two-way data transmission: it allows for signal strength feedback to the standard receiver, supporting the transmission of detected battery voltage (e.g., EruL Y3E BVD) as well as sensor data such as speed, temperature, and voltage.

The FS-G7P features a self-locking switch (SW1), three sets of reset switches (SW3), two knobs (VRI, VRZ), a five-way switch, and one reset key (SW2).

The FLYSKY FS-G7P features a Type-C data port that supports multiple types of interfaces. It also enables firmware upgrades and allows for direct connections to simulators and racing games such as VRC, Flight 2018/2019, SANS, Spinning Tire, and Eurocar.

The FLYSKY FS-G7P comes with 4 x 1300mAh Ni-MH batteries that have a service life of over 10 hours when fully charged. This means you can enjoy responsible play without worrying about battery life, thanks to the low power consumption.

The FLYSKY FS-G7P is compatible with all other ANT protocol receivers, including our standard FS-RZP model. Additionally, this system supports popular protocols such as FLISKL FS MP MD fs-R4P and fs-R4B.

Enjoy a customized upgrade experience with perfect control. This accessory package includes support for standard or optional sponge handwheels. Additionally, you can configure the new mobile phone bracket version and power your device with a 25-lithium battery.

The out-of-the-box settings for the transmitter and receiver are already configured successfully. If you need to replace either device or upgrade to a new one, please follow these steps: [insert instructions].

To ensure safe shutdown, always disconnect the receiver's battery before turning off the transmitter. If binding is not completed within 10 seconds, the receiver's indicator light will enter its slow flashing state.

This receiver features two fail-safe modes: ON and OFF. Please note that when the receiver is in the OFF mode, there will be no output from the PWM interface.

The FlySky Assistant has the following specifications: * Update distance: up to 300 meters (ground level) * Working current: approximately 110mA at 6V * Temperature range: 10°C to 60°C * Humidity range: 20% to 90% * Dimensions: 136.4mm x 111.8mm x 197.5mm * Weight: 305 grams * Certifications: CE, FCC (ID: N4ZG7POO)

The settings menu provides five parameters for customization: RF type, receiving type, output mode, response speed, and BIND. When replacing a receiver, you must bind the new receiver to the transmitter using the binding function.