Details
via Bluetooth
FC configurator and tune your quad anytime, anywhere.
Experience wireless, fully configurable ESC experience with
SpeedyBee app.
soldering. Built with Japan made TDK filtering SMT capacitors +
onboard TVS protective diode, brings smooth flight experience.
Real 50A output, ready for your baddest 6S motors.
Just look at the FC!
anywhere worry-free - even without your lipo checker!
* 1 light constantly on: battery level 10-25%
1 light blinking: battery level < 10%
fixed-wings
fixed wings. Forget about crawling through your massive build
just to plug in that USB cable. Just take out your phone to
configure everything in the SpeedyBee app.
wirelessly!
Take your smartphone out, and configure your motor direction
wirelessly with the latest SpeedyBee app. Works for all
BLHeli32 / BLHeli_S / BlueJay ESCs.
simple switching
and blaze the darkest trail you can find. With just one tap on t
he BOOT button, you can cycle through all different LED presets**
and pick the one you love!
* LED strips could be purchased here
**Or long press the boot button to switch to Betaflight LED mode
TVS protective diode =
Extra protection
spike when you plug in the battery, or during crashes that block
your props.We also provide a humongous 1000uF low ESR
capacitor, ensuring clean data from the gyro to the FC.
useful features
● SD Card slot can support up to 4GB Blackbox data*
● Dedicated DJI Air Unit connector for a quick digital build
● 9V 2A + 5V 2A individual BECs
● 4 x UARTs for your receiver + VTX + camera + GPS.
● Power your GPS with a USB cable - no battery needed.
No extra heat, no worries.
● 22mm cutouts for FPV camera in your tight build
either Standard (SDSC) or High capacity (SDHC), so extended
capacity cards (SDXC) are not supported(Many high-speed U3 cards
are SDXC). Also the card MUST be formatted with the FAT16 or FAT32
(recommended) filesystems. So, you could use any SD card less than
32GB, but the Betaflight can only recognize 4GB maximum.
We suggest you use this 3rd party formatting tool and choose
'Overwrite format' then format your card. Also check out here for
the recommended SD cards or buy the tested cards from our store.
SpeedyBee F405 BLS 50A 30x30 4-in-1 Electronic Speed Controller (ESC) Connection with motors via power cable Motor 1 Motor 2 Motor 3 and Motor 4 XT60 power cable Low ESR capacitor for surge protection Note It is recommended to use the low ESR capacitor to prevent voltage spikes from damaging the ESC.
The SpeedyBee F405 BLS 50A 30x30 4-in-1 Electronic Speed Controller (ESC) is a high-performance controller designed for drone racing and freestyle applications. It features a compact 30x30mm size, 50A continuous current rating, and 4-in-1 functionality allowing for connection to multiple motors. The ESC supports SBUS, I2C, and GND communication protocols.
SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC: A high-performance ESC suitable for racing and freestyle flying. It features a 30x30mm footprint, weighs just 50g, and has a maximum current rating of 50A. The ESC supports SBUS, PWM, and ONESHOT125 protocols and is compatible with popular flight controllers like F4O5 V3.
SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC, a versatile flight controller with features like FPV cam, 4-in-1 ESC receiver, extra PWM output, and 5V G CAM CC. It also has an Orange LED, 8 USB typ-C port, 4-level LED, and an 8-bit battery indicator.
SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC: Driver chip, Motor 4, Motor 2, Motor 3, and Motor 8. Features an 8-pin connector to FC, 12V input, and MCU (BB28) with TVS diode.
SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC: Mengxing Bundle including SpeedyBee BLS 50A 4-in-1 Electronic Speed Controller, one 35V 10Ohm Low ESR Capacitor, one M3 silicone O-ring, five XT60 Power Cables (100mm), one SH 1.0mm 25mm-length 8-pin Cable (for FC-ESC connection), and one set of M3*8.1mm Silicone Grommets (for ESC).
