Buy Holy Stone HS280 : https://rcdrone.top/products/holy-stone-hs280-drone
Table of content (English Deutch)
- Safety guidelines
- Maintenance
- Package contents
- Drone details
- Transmitter details
- Mode switch
- Installation
- Propellers
- Drone battery
- Charging
- Using the APP
- Download mobile APP
- Connect wifi
- Operation guide
- Pairing
- Calibration the Gyro
- Unlocking/Locking the Motors
- One Key Take-off/Landing
- Functions details
- Emergency stop
- Speed switch
- Take photo/record video
- Camera angle adjuitement
- Headless mode
- Trimmer
- Altitude-hold function
- Specifications
- General information
User Manual: Holy Stone HS280 Drone
Safety Guidelines:
1. Read the entire user manual before operating the drone.
2. Keep the drone away from children and pets.
3. Fly the drone in open areas away from obstacles and people.
4. Do not fly the drone in adverse weather conditions such as strong winds or rain.
5. Ensure the drone is fully charged before each flight.
6. Do not operate the drone near airports or restricted airspace.
7. Follow all local regulations and laws regarding drone operation.
Maintenance:
1. Keep the drone clean and free from dust and debris.
2. Inspect the propellers before each flight for any signs of damage or wear.
3. If any components are damaged, replace them before using the drone.
4. Store the drone in a cool, dry place when not in use.
5. Avoid exposing the drone to extreme temperatures or direct sunlight.
6. Regularly check and tighten all screws and connections.
Package Contents:
1. Holy Stone HS280 Drone
2. Transmitter
3. Drone battery
4. USB charging cable
5. Propeller guards
6. Spare propellers
7. Screwdriver
8. User manual
Drone Details:
The Holy Stone HS280 Drone is a high-performance quadcopter equipped with advanced features. It has a sturdy build and sleek design.
Transmitter Details:
The transmitter is the remote control device used to operate the drone. It has a user-friendly layout and intuitive controls for easy operation.
Mode Switch:
The mode switch allows you to switch between different flight modes, such as beginner mode and expert mode. Refer to the user manual for instructions on how to change the flight mode.
Installation:
1. Attach the propeller guards to the drone if desired.
2. Install the propellers on the corresponding motor shafts. Follow the marked directions to ensure proper installation.
Propellers:
The drone uses four propellers, two clockwise (CW) and two counterclockwise (CCW). Ensure proper installation and regularly inspect for any signs of damage or wear.
Drone Battery:
The drone is powered by a rechargeable battery. Follow the instructions below for battery handling and installation.
Charging:
1. Connect the USB charging cable to a power source.
2. Connect the other end of the USB cable to the drone battery.
3. The LED indicator on the battery will illuminate during charging and turn off when fully charged.
Using the APP:
The Holy Stone HS280 Drone can be controlled using a mobile application (APP) on your smartphone or tablet. Follow the steps below to use the APP.
Download Mobile APP:
1. Search for the "Holy Stone" APP in your device's app store.
2. Download and install the APP on your device.
Connect Wi-Fi:
1. Power on the drone and transmitter.
2. Enable Wi-Fi on your device and connect to the Wi-Fi network named "HS280-XXXXXX."
3. Launch the Holy Stone APP.
4. The APP will automatically connect to the drone.
Operation Guide:
1. Pairing:
- Power on the drone and transmitter.
- Move the left joystick up and down to bind the transmitter with the drone.
- The LED lights on the drone will stop flashing once pairing is successful.
2. Calibration the Gyro:
- Place the drone on a flat surface.
- Power on the drone and transmitter.
- Move both joysticks to the bottom right corner and hold for a few seconds.
- The LED lights will flash rapidly to indicate successful gyro calibration.
3. Unlocking/Locking the Motors:
- To unlock the motors, move both joysticks to the bottom inner corners.
- To lock the motors, move both joysticks to the bottom outer corners.
4.
One Key Take-off/Landing:
- Ensure the drone is calibrated and the motors are unlocked.
- Press the One Key Take-off/Landing button on the transmitter.
- The drone will automatically take off or land.
Function Details:
1. Emergency Stop:
- In case of an emergency or loss of control, press the Emergency Stop button on the transmitter.
- The drone will immediately stop and hover in place.
2. Speed Switch:
- The drone has multiple speed modes (low, medium, high).
- Use the speed switch on the transmitter to adjust the speed according to your skill level and flight environment.
3. Take Photo/Record Video:
- Press the corresponding button on the transmitter to take a photo or start/stop video recording.
- Photos and videos will be saved on the inserted microSD card or smartphone, depending on the APP settings.
4. Camera Angle Adjustment:
- If your drone is equipped with a camera, use the camera angle adjustment feature to change the camera's tilt angle.
- Adjust the camera angle using the controls on the transmitter or APP.
5. Headless Mode:
- In Headless Mode, the drone's orientation is based on the pilot's perspective, regardless of the drone's actual direction.
- Activate Headless Mode using the dedicated button on the transmitter.
6. Trimmer:
- The trimmer buttons on the transmitter allow you to fine-tune the drone's stability and responsiveness.
- Adjust the trimmer settings as needed to achieve balanced flight.
7. Altitude-Hold Function:
- The drone is equipped with an altitude-hold function, which allows it to hover at a certain height.
- Engage the altitude-hold function by pressing the corresponding button on the transmitter.
Specifications:
- Model: Holy Stone HS280
- Drone Weight: [Insert weight]
- Dimensions: [Insert dimensions]
- Battery: [Insert battery type and capacity]
- Flight Time: [Insert flight time]
- Control Range: [Insert control range]
- Camera: [Optional, if the drone has a camera]
- App Compatibility: iOS and Android
General Information:
For any further assistance or inquiries, refer to the Holy Stone customer support website or contact their customer support team. Always refer to the latest version of the user manual for accurate information and updates.