Summary:

Introducing the new 1.6-inch GEPRC SMART16 mini-quadcopter, currently available in 5 versions: PNP, AC900 and TBS Nano, ELRS 915, ELRS 2.4G

SMART 16 continues the consistent lightweight design concept of the Phantom series. The 1.5mm carbon fiber arm, with a 1mm top plate allows it to be lightweight and tough at the same time. We used highly potential 11000Kv 0803 brushless motors paired with 1610 props, so you can easily freestyle in your favorite field or a bando. The quadcopter comes with a 3D printed battery holder and will be powered by 2S 380mAh battery,which consists of two 1S batteries in series, making it weigh as little as 53.0g, and providing you with 4 minutes of flight time.

We are pursue lighter weight, better flying experience, and more functionality for all our products!

Specifications:

• Model: SMART16

• Frame: GEP-ST16

• Wheelbase size: 78mm

• Top plate thickness: 1.0mm

• Bottom plate thickness: 1.5mm

• Arm thickness: 1.5mm

• FC:  STABLE F411 FC (16*16mm)

• MCU: STM32F411

• IMU: MPU6000(SPI)

• OSD: BetaFlight OSD w/AT7456E chip

• ESC: STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)

• VTX: STABLE F411 VTX 5.8G 200mW(16*16mm)

• Camera: Caddx Ant

• Propeller: GemFan 1610-2

• Antenna: UFL 5.8G stick VTX antenna

• Motors: GR0803-11000KV

• Weight: 36.0g

• Receiver version: PNP (without a receiver), AC900, TBS Nano RX, ExpressLRS 915, ExpressLRS 2.4G

Features:

1. 1.6 inch tiny size + light weight, just 36.0g

2. With 2S 380mAh (two 1S batteries in series) battery with plenty of  power output

3. Equipped with 200mW 5.8G VTX, with 6 frequency bands and 8 frequency point selection

4. Caddx Ant camera with high quality image. Clear and clean!

5. Independent battery compartment design, can be sticked on top or bottom, making it easy and convenient to switch batteries.

6. The latest 0803 motor is matched with 1610-2 propeller proving maximum power and efficiency

7. Suitable for both freestyle and racing

8. Includes a full set of high qualt 3D printed parts for superior flying experience

Includes:

1 x SMART16 set

4 x GemFan 1610-2 propellers

2 x Battery tie M12x120mm

2 x Battery non-slip mat

1 x Spare printed set

1 x Spare screw pack

1 x Spare screwdriver set

-------------------

Related Article:

GEPRC SMART 16 Review

 GEPRC SMART16 Freestyle FPV Drone - Caddx Ant Camera GR0803-11000KV Motor STABLE F411 FC For RC FPV Lightweight Quadcopter Drone: An Evaluation

The GEPRC SMART16 is a compact and lightweight freestyle FPV drone that offers impressive performance and versatility. With its advanced components and thoughtful design, it caters to both beginners and experienced pilots who are looking for an agile and reliable quadcopter. In this evaluation article, we will delve into the parameters, advantages, selection criteria, operation manual, and frequently asked questions about the GEPRC SMART16.


Advantages:

1. Compact and Lightweight: The GEPRC SMART16 weighs only 36.0g, making it incredibly nimble and maneuverable in the air. Its small size allows for agile flight and ease of transport.

2. Powerful Performance: Equipped with the GR0803-11000KV motors and GemFan 1610-2 propellers, this drone offers exceptional power and efficiency. It can handle both freestyle and racing maneuvers with ease.

3. High-Quality Camera: The Caddx Ant camera provides clear and clean video footage, allowing pilots to enjoy a immersive FPV flying experience. The camera's high-quality image transmission ensures optimal visibility during flights.

4. Versatile Battery Compartment Design: The independent battery compartment can be attached to the top or bottom of the drone, providing flexibility in battery placement. This design allows for quick and convenient battery swaps during flight sessions.

5. Advanced Flight Controller: The STABLE F411 FC, powered by the STM32F411 MCU, offers stable and responsive flight control. With the MPU6000 IMU and BetaFlight OSD, pilots can fine-tune their drone's performance and monitor crucial flight data.

6. Extensive Receiver Compatibility: The SMART16 is available in different receiver versions, including PNP (without a receiver), AC900, TBS Nano RX, ExpressLRS 915, and ExpressLRS 2.4G. This wide range of options ensures compatibility with various remote control systems.

7. Included 3D Printed Parts: The drone comes with a full set of high-quality 3D printed parts, enhancing the overall flying experience. These additional parts offer durability and customization options for pilots.

How to Choose:

When selecting the GEPRC SMART16, consider the following factors:

1. Receiver Compatibility: Choose the version that is compatible with your preferred remote control system. Ensure

that it supports your desired frequency and protocol for seamless integration.

2. Flight Purpose: Determine whether you primarily intend to use the drone for freestyle flying or racing. The SMART16 is suitable for both, but specific requirements may vary based on your preference.

3. Battery Compatibility: Ensure that the drone's battery compartment is compatible with your preferred battery type and size. Consider the flight time and power output you require for your flying sessions.

Operation Manual:

To operate the GEPRC SMART16, follow these general steps:

1. Charge the Batteries: Charge the 2S 380mAh batteries (two 1S batteries in series) using a compatible charger. Ensure the batteries are fully charged before flying.

2. Binding and Setup: If you have the receiver version, follow the manufacturer's instructions to bind your receiver to your remote control system. Configure the flight controller settings according to your preferences using BetaFlight or the recommended software.

3. Propeller Installation: Attach the GemFan 1610-2 propellers securely to each motor. Ensure they rotate in the correct direction for efficient flight.

4. Camera Adjustment: Adjust the angle and focus of the Caddx Ant camera to achieve optimal video footage during flight. Secure the camera position to prevent unwanted movement.

5. Battery Installation: Place the fully charged batteries in the independent battery compartment. Attach the compartment to the top or bottom of the drone, ensuring a secure fit.

6. Pre-flight Check: Before each flight, conduct a thorough check of all components, including propellers, camera, battery, and receiver. Ensure everything is in working order and properly connected.

7. Flight Execution: Take off from a suitable location, ensuring you have ample space and adhering to local drone flying regulations. Practice your desired flying maneuvers while maintaining awareness of your surroundings.

FAQ (Frequently Asked Questions):

Q1: Can I use a different camera with the GEPRC SMART16?
A1: While the drone comes with the Caddx Ant camera, you can replace it with another compatible camera if desired. However, ensure that the new camera's dimensions and specifications are suitable for the SMART16 frame.

Q2: What is the flight time of the SMART16?
A2: The flight time can vary depending on factors such as battery capacity, flying style, and payload. With the included 2S 380mAh batteries, you can expect a flight time of approximately 3-5 minutes.

Q3: Can I upgrade the motors on the SMART16?
A3: Yes, you can upgrade the motors to different specifications, provided they are compatible with the frame and flight controller. Ensure that the motors' size, KV rating, and mounting pattern match the SMART16's requirements.

Q4: Does the SMART16 support 4S batteries?
A4: No, the SMART16 is designed for use with 2S batteries. Using a higher voltage battery, such as a 4S, may damage the drone's components and is not recommended.

Q5: Is the SMART16 suitable for indoor flying?
A5: Due to its compact size and powerful performance, the SMART16 is best suited for outdoor flying or large indoor spaces. Flying indoors with limited space may pose challenges and increase the risk of crashes.

Conclusion:

The GEPRC SMART16 Freestyle FPV Drone offers an impressive combination of performance, durability, and convenience. With its lightweight design, powerful motors, high-quality camera, and versatile features, it caters to both freestyle and racing enthusiasts. The SMART16's parameters, advantages, selection criteria, operation manual, and frequently asked questions outlined in this evaluation article provide a comprehensive overview of its capabilities. Whether you're a seasoned pilot or a beginner looking for an exciting FPV experience, the GEPRC SMART16 is worth

considering for your next drone adventure.