Mayatech MT08MAII Metal Gear Servo SPECIFICATIONS
Brand Name: Mayatech
Origin: Mainland China
Material: Composite Material
Recommend Age: 12+y
RC Parts & Accs: Servos
Size: 23mm*12mm*32mm
For Vehicle Type: Airplanes
Use: Vehicles & Remote Control Toys
Remote Control Peripherals/Devices: Servos
Tool Supplies: Assembly Category
Quantity: 1 pcs
Model Number: MT08MAII
Mayatech MT08MAII Metal gear steering gear fixed wing helicopter trolley / ship model
Product introduction
It can be widely used for model aircraft with 9g hole size, such as micro aircraft, hand throwing glider, flying wing, 3D, indoor model, KT aircraft, f3p, EPP aircraft, etc
Note:
1. Please pay attention to adjust the center before installing the steering gear arm to avoid damage
2. 180 degrees can only be achieved by using the control board of the robot, and the general remote controller can only reach [about 90 degrees]
3. 360 degree refitted steering gear: it is actually equivalent to a deceleration steering gear with stepless speed change, which can control speed and direction. There is no function of 0-360 degree angle control. The control mode is the same as the control signal of general steering gear. It is a suitable power source for tile modification
4. When the high level is 1 ms ~ 1.5 ms, the steering gear rotates forward (the forward rotation speed is the fastest in 1 ms, the closer it is to 1.5 ms, the slower it is, and the steering gear stops at 1.5 ms). When the high level is 1.5 ms ~ 2 ms, the steering gear reverses (the steering gear stops at 1.5 ms, the faster the reverse speed is when it is closer to 2 ms, and the reverse speed is the fastest in 2 ms).
Product parameters
Product model:MT08MAII
Product size: 23mm * 12mm * 32mm
Product weight: 13.6g
Working torque: 2.4kg/cm (4.8V) 2.8kg/cm (6V)
Reaction speed: 0.11 "/ 60 ° (4.8V) 0.09" / 60 ° (6.0V)
Service temperature: 0 ℃ - 55 ℃
Dead band setting: 5 microseconds
Plug type: Jr, Futaba universal
Rotation angle: 180 °
Steering gear type: digital steering gear
Service voltage: 4.8v-6v
Structural material: metal copper teeth, hollow cup motor, double ball bearing
List of accessories: rudder plate, wire length of 25cm, fixing screw, damping sleeve and aluminum kit, etc
This price is a single price, packing list:
Steering gear * 1 + rudder arm * 3 + screw * 3