SpeedyBee F7V2 Specifications
MCU | STM32F722 |
IMU | MPU6000 |
USB | Type-C |
Barometer | BMP280(I2C) Warning:Do not apply conformal coating on the berometer because the air hole can be clogged. |
OSD | BetaFlight OSD w/ AT7456E chip |
BLE | Support, used for Flight Controller configuration |
WiFi | Support, used for data transfer, e.g firmware flashing, and Blackbox analysis. |
DJI Air Unit slot | A full DJI Air Unit JST slot onboard |
BlackBox | 16MB onboard dataflash |
Current Sensor | 1 : 10 (Scale 168) |
BetaFlight Camera Control Pad | Yes |
Power input | 3S - 6S Lipo |
5V BEC x 1 | 5V output x 7 , 6 pads, and a BZ+ pad used for Buzzer, the maximum load current in total is 2.5A. |
9V BEC x 1 | 9V output x 2 , 1 pad and another one used for DJI slot, the maximum load current in total is 2.5A. |
4.5V power output | 1 * 4.5V output pad |
3.3V power output | 1 * 3.3V output pad, the maximum load current is 500mA. |
ESC signal | M1 - M4 |
UART | Full UART * 5(UART1, UART2, UART3, UART5, UART6) |
ESC Telemetry UART | UART4 RX |
I2C | Used for external Magnetometer, Sonar, etc. |
LED pin | Used for WS2812 LED |
Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
Boot button | Used to easy enter DFU mode |
RSSI input | RSSI input solder pad |
SmartPort | Use any TX pad of UART for the SmartPort feature. |
Support Flight Controller Firmware | BetaFlight(Default), EMUFlight |
Target name | SPEEDYBEEF7V2 |
Mounting | 30.5 x 30.5mm, 4mm hole size |
Dimension | 41 x 38 x 6.9mm |
Weight | 9g |
SpeedyBee F7 V2 Details
SpeedyBee F7 V2 Flight Controller Product Image: Features: • Gyro Low Pass Filter (PTT) with dynamic cutoff between 200-500Hz • Gyro Low Pass Filter Zeroing (PTA) with cutoff at 50Hz • World first FC with wireless firmware flashing and blackbox analyzer access • PID (pitch): -0.9% • Flash firmware wirelessly • Analyze Blackbox data wirelessly • PID tuning: 0, 0% • Set motor directions on BLHeli_32/S wirelessly for full configuration (BF/INAV/EMU) • Built-in Wi-Fi and Bluetooth • Motor outputs: + Motor [1]: 35% + Motor [2]: 19% + Motor [3]: 32% + Motor [4]: 24%
FC Firmware Flasher Step 3/3: Flash the latest firmware wirelessly. Built with a WiFi Bluetooth two-in-one chip, upgrade your FC firmware via WiFi connection using your smartphone in just 90 seconds.
The SpeedyBee F7 V2 Flight Controller allows for seamless analysis of flight data. With the ability to tune your quad at any time, you can land it, pull out your smartphone, and access your Blackbox data in just a minute. This convenient feature eliminates the need for a laptop or wires, making it a mess-free experience.
WIFI Bluetooth: The Best of Both Worlds. Use Bluetooth for quick access to your firmware configurator or switch to Wi-Fi to flash firmware or download Blackbox data. Simply plug in your LiPo battery to activate wireless connectivity and arm your quad to deactivate it - easy!
Introducing the SpeedyBee F7 V2 Flight Controller, designed for perfection. The board features 22mm cutouts for an FPV camera on both the FC and ESC boards, ideal for compact racing frames. The gyroscope is precisely placed at the center of the board to provide accurate gyro data for your flights. With its reliable performance, this flight controller is perfect for pilots seeking a high-quality flying experience.
SpeedyBee F7 V2 Flight Controller: 14mm Immersion (30x30) P/G, RSI IVS, PWM, ICA SVi, TS [Raven @id], BTAN IF, EC [41.4mm x 45.6mm] Kc, F7 V2, Digital Gyro, Live SpeedyBee, Regulator, 5th Generation Vortex.
SpeedyBee F7 V2 Flight Controller. Includes one unit of SpeedyBee F7 V2 FC, one Fnd D0 4" JST 8PIN Cable, and one DJI 6PIN Cable (8Omm). Also includes five pieces of 8mm Anti-vibration Silicone Grommets for vibration reduction.