About customs duties: we can declare a price of$20to help you avoid any customs duties

Built-in 4 x LED plugs + quick 5OOMB super huge onboard Blackbox mode switch via BOOT button flash memory Onboard 4-level battery life CNC heat sink for cooler ESC indicators 1500uF Low ESR capacitor + TVS Solder-free plugs for digital video protective diode for ESC transmitter; receiver; camera, VTX, protection GPS,and Ax LED strips 6 CAMCCIRS 3pC/a4B/z [3V3]

SpeedyBee F7 V3: A premium device featuring advanced specifications such as R2, I2, G, SV, G MG, MZ, M8, G, M5, R3, T3, and 1-1-1 SB BT P8d. This wireless firmware flasher enables fast flashing of Betaflight configurations and retrieval of full Blackbox data in just one minute, all without soldering. Additionally, it features solder-free plugs for connecting digital video transmitters, receivers, cameras, VTX, GPS, and 4x LED strips.

SpeedyBee F7 V3 BL32 50A 30x30 Stack: Blackbox Data Analyze iNAV Betaflight Emuflight Wireless Firmware Flasher. This device has the following specifications: SL 6, SL 0, GPS PID 0, app version 960/960; Tl 0, Rc 3.5, fully UI 7.8.6.3.9.0.3 R PWRI 0.5.2.4.39 PM SpCeOy KBIS 0.02v Bzz Flasher Gyro Firmware Accel (SPEEDYBEEFZV2 STM32).

Experience instant access to your Blackbox flight data at any time, from anywhere in the world. With an optimized algorithm and advanced Bluetooth/WiFi connectivity, simply take out your smartphone, connect, and download your flight data in just 20 seconds.

The SpeedyBee app enables wireless motor direction changes, compatible with all BLHeli32, BLheli_S, and BlueJay ESCs, including those running at 21.8V or lower.

The Betaflight LED mode has a lengthy cycle, making it easy to navigate. Simply tap the Boot button once to seamlessly transition into Betaflight mode.

Please note that the displayed storage capacity may appear slightly lower on your computer, approximately 490MB, due to the manufacturer's calculation method using a factor of 100 (as opposed to the standard 1024) for flash memory capacity.

The SpeedyBee F7 V3 BL32 includes a built-in barometer for precise height measurement. It features separate 9V and 4A, as well as 5V and 2A BECs (Battery Eliminators) to power your GPS. You can charge it via USB without needing a battery. Additionally, the device has 22mm cutouts for installing an FPV camera in tight spaces.

SpeedyBee BL32 50A 4-in-1 ESC 50A ESC MADE FOR CHAMPIONS +12 34CT 4206 067i 4206 9cci BL37 V3 32 9u21 Equipped with a CNC heat sink Real 50A output; real performance for cooler ESC Support up to 128KHz PWM TVS protective diode + 1500uF Low frequency ESR capacitor for more protection

Get real-time 50A output for your most powerful 6S motors with SpeedyBee's F7 V3 BL32, featuring a maximum current of 50 amps and compatible with +/-12V, 34C temperature, and 0EE firmware.

The ESC features a TVS protective diode, which absorbs voltage spikes when you connect the battery, providing a safe power-on experience. Additionally, it includes a high-capacity 1500uF low-ESR capacitor, ensuring clean and stable data transmission from the gyro to the flight controller.

The SpeedyBee F7 V3 BL32 firmware supports up to 128kHz PWM frequency control via the F4 MCU. The optimal frequency setting depends on various factors, including the frame, motors, props, and other components. A higher frequency does not necessarily guarantee smoother flight; rather, it's essential to find the ideal balance for your specific setup.

The SpeedyBee F7 V3 BL32 50A features a high-quality CNC heat sink shield, which significantly reduces heat from your MOSFETs.

Package Option 1: SpeedyBee F7 V3 with SOA 30x30 stack, SV G-CAM, CC iRS3V3, AVS R2, 12A @ e-MGM, MIIIMI 10 ki 8 B, 1/58 'Me DCJ 8 E CJCJ PBo F7 26 SDA SCL SV LED SV BAT SV bz+ Bz 4V5 R6lgv VIXTI RIIBAT.

This product is designed for use with receivers that have an input voltage of 3.3V. It supports up to 50 amps of current load, and features ESC signal pads on both the bottom (M1-M4) and top (M5-M8) sides. Additionally, it includes UART ports (UART1, UART2, and UART3) for ESC telemetry, as well as an I2C port (R4, or UART4).