Features:

1. 2.4G technology, FHSS 67 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.

2. Receiver response time is 2ms, ensuring a fast response and better control.

3. Smooth and highly sensitive to control inputs and stable at distances from 200-300m.

4. Compatible with a variety of vehicles, suitable for RC cars, RC boats and RC tanks.

5. With brake and fail safe, out of control protection function.

6. Each of the 3 channels can be set respectively, supporting mixed control of 1 and 2 channels.

7. Voltage range of the transmitter. 4.8V-6V voltage warning:

8. Voltage range of the receiver. 3.3V-6V, working current 30mA, supports high voltage servos.

Specifications of Transmitter:

Channels: 4

Mode Type: RC Car Boat Tank

RF Power: Less than 20dbm

Response Time:10s-12ms

Control Distance: about 200-300m

Voltage Input: 4.8V-6Vor 1.5AAA*4

Low Voltage Warning: 4.5V

Net Weight: 260G

Size: 180*80*145mm

Specifications of Receiver:

Channels: 4

Frequency: 2.4GHz

Size:16*18*12mm

2.4Ghz TX-4 Channels Mini RX for 1/8 1/10 1/16 1/32 RC Car Boat Tank Crawler GA-4H-TX Transmitter and Receiver Set)

4-Channel Radio Controller for RC Cars and Boats: Features a color LCD screen, gyroscope, anti-runaway function, throttle control, steering wheel, and detachable handle. Also includes low-pressure alarm.

our company will not be held responsible for any caused by non-compliance with safety warnings . do not allow children to touch this product; and be careful when operating in scenes where children are present .

Note that if your model's directional control is offset when the steering wheel is centered (i.e., in neutral), you can use the fine-tuning shortcut key to adjust the direction.

To fully utilize the capabilities of this radio system, ensure the receiver antenna is intact and properly installed. Additionally, make sure to install all available vertical antennas. To activate the system, remove the battery cover and insert four new AAA batteries according to the polarity markings.

This process is only required when setting up a new transmitter or receiver. To do this, press and hold the code key for three seconds until the LED flashes rapidly. After that, wait for five seconds. Next, adjust the throttle trigger to set the TH position.

Please note that adverse weather conditions can potentially affect the functioning of this radio system. Before use, ensure that the transmitter's batteries are fully charged and keep the device out of reach of children to prevent any potential harm or damage.

TTER KIT TX-4 RX channer receiver Wm krGantbut Espkialyf channels L4onz Channels' Mini L g arne Cuomstructions oltonf Oplratund"